Audiovox SP-11CDS Manual do Utilizador descarregar pdf (Página 5)

Attach bracket to each side of the unit, using machine

screws with integral flat and lock washers. (M4 x 10).

In the vertical position, use holes 2 and 2' as shown

at left.

Mount the unit in place, using four self-tapping screws

(M5 x 12).

Use RTV (silicone sealer) on screw threads and around

the holes to prevent moisture intrusion.

Set the 2 anti-vibration springs to position "90".

Determine the mounting location, and drill four mounting

holes.

PROCEDURE FOR VERTICAL INSTALLATION W/O STUDS

Note

If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 4), start with step 2.

Never mount the unit near the fuel tank.

NOTE: Use masking tape to cover unused

mounting holes on sides of unit.

MACHINE SCREWS

w/WASHERS (M4x10)

BRACKET

(Right Side)

BRACKET

(Left Side)

DRILL HOLES 4MM IN DIAMETER

SELF-TAPPING

SCREWS (M5 x 12)

BRACKET

(Left Side)

BRACKET

(Right Side)

1 2 3 4 5 6 7 8

Sem comentários

Audiovox SP-11CDS Manual do Utilizador Página 5