Audiovox APS-997C Manual de Instalação Página 13
- Página / 32
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
128-8775b
13 of 32
13
D. Anti-Grind Starter Circuit Connection:
This wire, when connected to a starter inhibit relay, as shown in the diagram below, will prevent the
customer from engaging the starter while the vehicle is running under control of the remote start.
Configured in this way, while the remote start is controlling the vehicle, the light blue wire has ground on
it all the time. This ground will cause the relay to energize preventing current flow through the normally
closed contacts. This will prevent a customer who inadvertently turns the ignition switch to the start
position, from sending current to the starter.
22 Orange w/ White Trace Wire : 300 mA (-) Output When Disarmed
N. O. Starter Disable Circuit, (Optional Relay Required).
This wire is provided to control a normally open starter cut relay. Connect the orange/white wire to terminal
86 of the relay. Connect relay terminal 85 to an ignition wire in the vehicle that is live when the key is in the
on and crank positions, and off when the key is in the off position. ( This is typically an ignition 1 source),
Cut the low current starter solenoid wire in the vehicle, and connect the car side of the cut wire to relay
terminal 87. Connect the key side of the cut wire to relay terminal 30.
NOTE: This is a normally opened starter cut arrangement, when power is removed from the secu-
rity system, the starter disable feature will remain operational, and the vehicle will not start.
Audiovox does not recommend using the Orange w/ White trace wire to interrupt anything but the
starting circuit of the vehicle.
23 Orange Wire: 300mA (-) Ground When Armed Output
This wire provides a 300 mA ground output when the alarm circuit is armed to control the starter inhibit
relay. Connect the Orange wire to terminal #86 (orange wire) of the relay provided. Connect terminal #85
(red wire) of the relay to an ignition wire in the vehicle that is +12 volts when the ignition switch is turned
to the on and start positions and off when the key is off. Locate and cut the low current start solenoid
wire found at the vehicles ignition switch harness. This wire will have + 12 volts when the ignition key is
moved to the start (crank) position and will have 0 volts in all other key positions. Connect one side of
the cut wire to terminal #87a ( Black wire) of the relay. Connect the other side of the cut wire to terminal
#30 (White/Black wire) of the relay. See below for detail of wiring, also see Yellow Start wire detail for
connection to vehicle considerations.
- Model APS-997C 1
- Table Of Contents: 1
- Before You Begin 2
- PROFESSIONAL INSTALLATION IS 2
- STRONGLY RECOMMENDED 2
- 128-8775b 10
- 10 of 32 10
- 11 of 32 11
- 12 of 32 12
- 13 of 32 13
- 14 of 32 14
- 15 of 32 15
- 16 of 32 16
- 17 of 32 17
- 18 of 32 18
- 19 of 32 19
- 20 of 32 20
- 21 of 32 21
- 22 of 32 22
- 23 of 32 23
- 24 of 32 24
- 25 of 32 25
- 26 of 32 26
- 27 of 32 27
- 28 of 32 28
- 29 of 32 29
- 30 of 32 30
- 31 of 32 31
- 32 of 32 32
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Audiovox APS-997C
Sistemas de segurança - controlo de acesso Audiovox Car Security System APS 996a Especificações
(31 páginas)
(31 páginas)
(66 páginas)
Sistemas de segurança - controlo de acesso Audiovox Car Security System APS 996a Manual do Utilizador
(6 páginas)
(6 páginas)
Sistemas de segurança - controlo de acesso Audiovox APS-510C APS-510C Manual de Instalação
(8 páginas)
(8 páginas)
Whirlpool FTSS36AF20 manuels
Manuels d'utilisation et guides de l'utilisateur pour Réfrigérateurs Whirlpool FTSS36AF20.
Nous fournissons des manuels en pdf 1 Whirlpool FTSS36AF20 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentários a estes Manuais