Audiovox Car Security System APS 996a Especificações Página 11
- Página / 31
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Adjustment Procedure for Closure Timer using R19/R37
The closure timer determines how much time is spent raising the top to the safety
stop position. In order to function properly the top must reach the safety stop
before the timer expires. If the timer is too short then the top will hang prior to
the safety stop and will end up in the safety position until a subsequent Top
Close command is issued. If the timer is too long then the top will spend extra
time in the safety position prior to closure. ***EXTREME*** care should be taken
to avoid touching any part of the mechanism until the operations are completed.
Fine adjustments in the Hardtop to Safety time are made using the R37 screw
adjustment accessible through the front panel using a jewelers screwdriver. A
total range of approximately 5 seconds is available. Coarse adjustments can be
made by changing the value of R19. For every 10K change in R19 the timer
range will shift approximately 1 second.
Access R37 through the front panel
R37 access hole
Timer too short (Top hangs prior to safety stop)
Turn R37 counter-clockwise (CCW) to lengthen the timer. Each full turn
will add approximately 1 second to the timer.
If a timer longer than approximately 27 seconds is needed then R19 may
need to be increased
Timer too long (Top spends excessive time at safety stop)
Turn R37 clockwise (CW) to shorten the timer. Each full turn will subtract
approximately 1 second from the timer.
If a timer shorter than approximately 22 seconds is needed then R19 may
need to be decreased
Changing adjustment range using R19
R19 default value is 174K ohms
Each increase of 10K in the value of R19 will shift the timer range higher
by approximately 1 second. For example if R19 is increased to 185K then
the timer range will move from 22-27 to 23-28 seconds.
JNS Engineering 11 3/28/2009
Each decrease of 10K in the value of R19 will shift the timer range lower
by approximately 1 second. For example if R19 is decreased to 162K
then the timer range will move from 22-27 to 21-26 seconds.
- WIFI Top Controller 1
- Table of Contents 2
- Table of Tables 2
- Table of Figures 2
- General Description 3
- Functional Block Diagram 3
- Pin Assignment 4
- Functional Description 4
- Specifications 5
- PCB Layout 6
- Installation Instructions 7
- Wiring Color Codes (WIFI TOP 7
- Harness) 7
- Wiring the Harness 8
- Remote Top Testing 10
- APS-996a Wiring for 3000GT 16
- APS-996A Tach Programming 17
- Remote Start Safety Tests 18
- CONFIGURATION DIAGRAMS 19
- A36F0179 20
- 00004255 20
- 00004256 22
- CIRCUIT DIAGRAMS 25
- Power Distribution Circuit 25
- CIRCUIT (1992 MODEL) 26
- TURBO> (CONTINUED) 26
- CHASSIS ELECTRICAL 27
- Theft-alarm System 27
- ~~$yqppQ 29
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Audiovox Car Security System APS 996a
(66 páginas)
Sistemas de segurança - controlo de acesso Audiovox Car Security System APS 996a Manual do Utilizador
(6 páginas)
(6 páginas)
Sistemas de segurança - controlo de acesso Audiovox APS-510C APS-510C Manual de Instalação
(8 páginas)
(8 páginas)
KitchenAid KFGD500EWH manuels
Manuels d'utilisation et guides de l'utilisateur pour Cuisiniers KitchenAid KFGD500EWH.
Nous fournissons des manuels en pdf 1 KitchenAid KFGD500EWH à télécharger gratuitement par type de document : Manuel d'utilisation et d'entretien
Comentários a estes Manuais