Audiovox Car Security System APS 996a Especificações Página 5

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 31
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 4
Hardtop Close
An active low pulse on the hardtop close trigger starts a 68 second system timer
and a 25
1
second timing cycle to close the hardtop to the safety stop. A second
timer automatically fires for 13 seconds to complete the top closure. The hardtop
close trigger also terminates an active hardtop open cycle allowing the operator
to reverse operations without waiting for an active cycle to complete. If a hardtop
open cycle is terminated quickly after it was started, the hardtop close command
will cause the hardtop to delay at the safety stop for a period of time.
***EXTREME*** care should be taken to avoid touching any part of the
mechanism until the operations are completed
Specifications
Parameter Pin Test conditions Min Typical Max Units
Input voltage 1 12 V
Input current 1 Standby 5 mA
Trigger voltage 5,6,7,8 4 V
Sink current 5,6,7,8 Active trigger 5 mA
Output voltage 10,11,
12,13,
14
Active 12 V
Source current 14 Active 20 A
Source current 10,11,
12,13
Active 20 A
Tonneau open
time
8 S
Tonneau close
time
8 S
Hardtop open
time
29 S
Hardtop close to
Safety time
R19 =174K
1
22 25 27 S
Hardtop close
Time
13 S
System active
time
68 S
Table 2 - Specifications
JNS Engineering 5 3/28/2009
1
Hardtop to safety time can be changed by turning the screw for R37 which can
be reached through the front panel.
Vista de página 4
1 2 3 4 5 6 7 8 9 10 ... 30 31

Comentários a estes Manuais

Sem comentários